loading
| Availability: | |
|---|---|
| Quantity: | |
Parameter | Product Parameter |
Type | End Mill / Face Mill / Ball Nose Mill (Specify) |
Material | Carbide / High-Speed Steel (Specify) |
Number of Flutes | 3 (Three-Edge Design) |
Shank Diameter | 6mm, 8mm, 10mm (e.g.) |
Overall Length | 50mm, 75mm, 100mm (e.g.) |
Coating | Titanium Nitride, Zirconium Nitride (e.g.) |
Special Features | Compound Edge Structure |
Precision Cutting
Provides accurate and consistent cuts for precise joinery.
Versatility
Suitable for a wide range of woodworking tasks, from shaping to routing.
Durability
Constructed from high-quality materials for long-lasting performance.
Smooth Finish
Produces clean cuts with minimal burrs or chipping.
High quality cemented carbide
Select high-quality tungsten steel blades, finely ground to make them sharper and more durable, one-time molding without burrs.
Body spray painting process
The tool paint is evenly sprayed, the appearance is not only atmospheric and classy, but also high temperature resistant and anti-corrosive.
Handle Design
The cutter body is made of 45# steel, the handle is high-precision ground and polished, and the concentricity is high. The number is laser printed.
Q: What materials is the Compound Edge Three-Edge Chip Breaker Milling Cutter suitable for?
A: This milling cutter is suitable for cutting a variety of materials, including aluminum alloys, stainless steel, high-temperature alloys, and carbon steel. We recommend adjusting the cutting parameters based on the hardness and characteristics of the materials being processed to achieve optimal results.
Q: How do I choose the right cutting parameters?
A: Cutting parameters (such as cutting speed, feed rate, and depth of cut) should be selected based on the type of material being processed, the diameter of the milling cutter, and the characteristics of the machine tool. The provided technical data manual will offer guidance to ensure quality machining under different conditions.
Q: How do I handle chips during operation?
A:The design of the Compound Edge Three-Edge Chip Breaker Milling Cutter is intended to effectively break and evacuate chips. During the machining process, please monitor the contact between the tool and workpiece regularly to ensure that chips can be evacuated smoothly. If chip accumulation is observed, we recommend pausing the operation and checking the status of the tool.
Q: How can I maintain and extend the lifespan of the milling cutter?
A:After use, please clean the milling cutter promptly to remove any attached chips and oil residues. Regularly inspect the tool for wear; if significant wear is detected, we recommend replacing or regrinding the cutter. Additionally, storing the tool properly to prevent collisions or deformation will help extend its lifespan.
